How To Root Samsung Galaxy Fit S5670 And Install Custom Recovery Image

The Galaxy series mobile from the Samsung Company has been a superb hit in the Indian Market as well as International market. There is a good news for Samsung Galaxy Fit S5670 users that they can install the latest version of ClockworkMod recovery in your phone. Today in this article, I will tell you that How To Root Samsung Galaxy Fit S5670 And Install Custom Recovery Image.

Samsung Galaxy Fit S5670 Quick Specs:

Samsung Galaxy Fit

Note: This update should not be applied to the phones which are Network Locked Devices, if you still continue to apply this update then we cannot guarantee on the consequences.

Disclaimer: We at www.fever18.com should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.

Rooting Information:

  • Please note that Rooting voids the warranty. To get back the warranty, you need to note down the current firmware which you are so that you can install the same.
  • To unroot, you can apply anyone of the stock firmware.

Prime Requisites :

  • Take Backup of your Android phone contacts, your apps and your accounts associated with it.
  • Make sure Your Android device is atleast 50% charged so that it can’t get switched off.
  • Make sure that data cable is properly connected.

How To Root Samsung Galaxy Fit S5670 And Install Custom Recovery Image

Step 1: Download Rooting tar file from here, Odin from here and OPS file from here to your computer.

Step 2: Once downloaded all these files, Open ODIN file and turn off the device and enter into download mode.

Odin

Step 3: The download mode can be entered by holding Volume down button+ the Home key button while holding these both buttons, you need to switch ON your device. In case, the device boots in normal mode, then you have to try again by following these above step.

Step 4: Connect the device via USB data cable while keeping the ODIN opened. When you connect the device, the ODIN program will automatically detect it and you will see yellow ID:COM box in ODIN which mean that all the drivers are loaded successfully.

Step 5: In Odin, you need to select the corresponding files as mentioned below:

Click on “OPS” & Select “BENI_v1.0.ops”

Tick Mark On “One Package”

Click on “One Package” tab and choose the file named as “beni_cwm-5_ext4_v2”

Step 6: After selecting the two things from the above list, click on “Start” button. Once the update is installed successfully, the device will restart.

Step 7: Then turn off the Galaxy FIT S5670 and enter into recovery mode.

Step 8: The Recovery mode can be entered by holding Volume down button+ the Home key button while holding these both buttons, you need to switch ON your device.

Step 9: In Recovery mode, select “ Wipe data/factory reset” and “Wipe Cache partition”.

Step 10: Then reboot your device by selecting “Reboot System Now” option with the help of Volume rocker keys.

Congracts! You have successfully Rooted Samsung Galaxy Fit S5670 And Install Custom Recovery Image on it.

Please share this article on facebook or tweet about it on twitter or an alternate you can also subscribe to our RSS feeds just by entering the email address in the below field.

No comments yet.

Leave a Comment