The Samsung Galaxy Pop is mid range Android smartphone and runs on Google Android operating system. There is a good news that Samsung Galaxy Pop can update their device to the latest version of Official Android 2.3.6 Gingerbread DDLA1 firmware. This is an official firmware released by Samsung and users of India and global users can update their device. Today in this article, I will tell you that How To Update Samsung Galaxy Pop With Android 2.3.6 Gingerbread DDLA1 Firmware.
Note: Please note that this update can be applied by users who are not on Rooted Firmware.
Good For Knowledge: Update Samsung Galaxy Mini S5570 With Android 2.3.6 Gingerbread XWKT7 Firmware
Samsung Galaxy Pop S5570I Quick Specs:
The Samsung Galaxy Pop S5570I runs on Android 2.2 Froyo operating system and it is powered by 600 MHZ CPU, Adreno 200 GPU and Qualcomm MSM7227 chipset. The Samsung Galaxy Pop S5570I has the 3.14 inches TFT capacitive touchscreen display with the resolution of 240×400 pixels. It comes with 3.15 megapaixel rear camera. Other features are 160 MB storage, microSD card slot upto 32 GB, Wi-Fi, A-GPS support and SNS integration. The Samsung Galaxy Pop S5570I has the battery life upto 1200 mAh battery.
Disclaimer: We at www.fever18.com should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.
Prime Requisites :
- Take Backup of your Android phone contacts, your apps and your accounts associated with it.
- Make sure Your Android device is atleast 50% charged so that it can’t get switched off.
- Disable Anti virus and other tools in your computer.
How To Update Samsung Galaxy Pop S5570I With Android 2.3.6 Gingerbread DDLA1 Firmware
Step 1: Enable USB Debugging mode on your device, You can do this
Settings> Applications> Development
Step 2: Download Android 2.3.6 DDLA1 Gingerbread Firmware from here to your computer. Once you have downloaded, extract the same.
Step 3: Open ODIN file in your computer and turn off the device and enter into download mode.
Step 4: The download mode can be entered by pressing Volume down key, Centre button and simultaneously press the Power button.
Step 5: Connect the device via USB data cable while keeping the ODIN opened. When you connect the device, the ODIN program will automatically detect it and you will see yellow ID:COM box in ODIN which mean that all the drivers are loaded successfully.
Note: If ODIN doesn’t turn yellow, the you should not proceed to the next step. Then you need to Install the Samsung USB drivers, and the .Net Framework (its free) and also update KIES with the latest version.
Step 6: In Odin,
Click On OPS button and select the file as “TASS_v1.0.ops”
Tick Mark On “One Package”
Click On One Package Tab and select the file as “S5570IDDLA1_S5570IDDLA1_S5570IDDLA1_HOME.tar.md5”.
Step 7: Click on Start button and process will begin. Once the update is installed successfully, the device will restart.
Step 8: Then turn off the Samsung Galaxy Pop device and enter into recovery mode.
Step 9: The Recovery mode can be entered by pressing Volume Up key+ Centre button and simultaneously press the Power button.
Step 10: In Recovery mode, select “ Wipe data/factory reset” and “Wipe Cache partition”.
Step 11: After this, reboot by selecting reboot system now option.
Congracts! You have successfully Updated Samsung Galaxy Pop S5570I With Android 2.3.6 Gingerbread DDLA1 Firmware.
You can also check it:
- Update Samsung Galaxy 551 I5510 With Android 2.3.6 Gingerbread XWKPH Firmware
- Update Samsung Galaxy Pro B7510 With Android 2.3.6 Gingerbread XXKPB Firmware
- Download And Install Android 4.0.3 ICS ROM on HTC Evo 4G
- Download and Install Gingerbread 2.3.7 With CyanogenMod 7.1 RC1
- How To Root Motorola Droid X Using Petes Motorola Root Tools
odin does not detect my phone inspite of all the above steps !!!!