Update Samsung Galaxy Pro B7510 With Android 2.3.6 Gingerbread XXKPB Firmware

The QWERTY handsets used to be associated with hign end business phones. Now, there is a good news that the Samsung Galaxy Pro B7510 users can update their device with Android 2.3.6 Gingerbread XXKPB firmware.This firmware is not an official which is release by Samsung and there is no date when it will be rolling out. Today, in this article I will tell you that How To Update Samsung Galaxy Pro B7510 With Android 2.3.6 Gingerbread XXKPB Firmware.

Samsung Galaxy Pro B7510 Specs:

The Samsung Galaxy Pro B7510 runs on Android 2.2.2 Froyo and it is powered by 800 MHZ Armv6 CPU. The Samsung Galaxy Pro B7510 has the 2.8 inches TFT capacitive touchscreen display with the resolution of 320×240 pixels. It comes with 3.15 megapaixel rear camera. Other features are 270 MB RAM, 160 MB storage, microSD card slot upto 32 GB, Wi-Fi, A-GPS support and SNS integration. The Samsung Galaxy Pro has the battery life upto 1350 mAh battery.

Note: This update should not be applied to the phones which are Network Locked Devices, if you still continue to apply this update then we cannot guarantee on the consequences.

Disclaimer: We at www.fever18.com should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.

Prime Requisites :

• Take Backup of your Android phone contacts, your apps and your accounts associated with it.
• Make sure Your Android device is atleast 50% charged so that it can’t get switched off.
• Make sure that data cable is properly connected.
• Disable Anti virus and other tools in your computer.

Change Log Of the Firmware Update:

• Faster UI with better speed
• Better battery optimization
• Music player gets a facelift
• New Icon
• Firewall IP Settings have been changed
• Cut, Copy, Paste features have been induced.

How To Update Samsung Galaxy Pro B7510 With Android 2.3.6 Gingerbread XXKPB Firmware:

Step 1: Enable USB Debugging mode on your device, You can do this

Settings> Applications> Development

Step 2: Download Android 2.3.6 Gingerbread Firmware from here to your computer. Once downloaded, extract the same.

Step 3: Open ODIN file in your computer and turn off the device and enter into download mode.

Step 4: The download mode can be entered by pressing Q Button and simultaneously press the Power button to turn ON the device in the download mode.

Step 5: Connect the device via USB data cable while keeping the ODIN opened. When you connect the device, the ODIN program will automatically detect it and you will see yellow ID:COM box in ODIN which mean that all the drivers are loaded successfully.

Step 6: In Odin,

Click On OPS button and select the file as “BENNETT_v1.0.ops”

Tick Mark On “One Package”

Click On One Package Tab and select the file as “B7510XXKPB_B7510XXKPB_B7510XXOXAKP4_HOME.tar.md5”.

Step 7: Click on Start button and process will begin. Once the update is installed successfully, the device will restart. You will see that the phone will prompt you to enter the Language Settings as well as Google Account credentials.

Step 8: Check your firmware version by going to Settings> About Phone> Firmware version and you will find the version of Android 2.3.6 XXKPB firmware. If not applied, repeat the process again.

Please share this article on facebook or tweet about it on twitter or an alternate you can also subscribe to our RSS feeds just by entering the email address in the below field.